netstat

netstat命令

netstat 命令用于显示各种网络相关信息,如网络连接,路由表,接口状态 (Interface Statistics),masquerade 连接,多播成员 (Multicast Memberships) 等等

1 常用选项:

-a :(all)显示所有选项,默认不显示LISTEN相关

-t :(tcp)仅显示tcp相关选项

-u :(udp)仅显示udp相关选项

-n :以数字显示IP和端口,能显示数字的全部转化成数字。

-l :仅列出有在 Listen (监听) 的服務状态

-p: 显示建立相关链接的程序名

-r :显示路由信息,路由表

-e :显示扩展信息,例如uid等

-s :按各个协议进行统计

-c :每隔一个固定时间,执行该netstat命令。

-w:raw socket相关

2 -tan 显示所有tcp端口

[root@centos7 ~]# netstat -ant
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 192.168.122.1:53 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN
tcp 0 52 192.168.29.3:22 192.168.29.1:51029 ESTABLISHED
tcp 0 0 192.168.29.3:22 192.168.29.1:51180 ESTABLISHED
tcp6 0 0 :::111 :::* LISTEN
tcp6 0 0 :::22 :::* LISTEN
tcp6 0 0 ::1:631 :::* LISTEN
tcp6 0 0 ::1:25 :::*

3 显示所有udo端口 -uan

[root@centos7 ~]# netstat -anu
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 0.0.0.0:5353 0.0.0.0:*
udp 0 0 0.0.0.0:47414 0.0.0.0:*
udp 0 0 192.168.122.1:53 0.0.0.0:*
udp 0 0 0.0.0.0:67 0.0.0.0:*

4 显示所有处于监听的tcp端口    -tnl

[root@centos7 ~]# netstat -tnl
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 192.168.122.1:53 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN
tcp6 0 0 :::111 :::* LISTEN
tcp6 0 0 :::22 :::* LISTEN
tcp6 0 0 ::1:631 :::* LISTEN
tcp6 0 0 ::1:25 :::* LISTEN

5 显示所有处于监听状态的udp端口 -unl

[root@centos7 ~]# netstat -unl
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 0.0.0.0:5353 0.0.0.0:*
udp 0 0 0.0.0.0:47414 0.0.0.0:*
udp 0 0 0.0.0.0:20815 0.0.0.0:*
udp 0 0 192.168.122.1:53 0.0.0.0:*
udp 0 0 0.0.0.0:67 0.0.0.0:*
udp 0 0 0.0.0.0:68 0.0.0.0:*
udp 0 0 0.0.0.0:68 0.0.0.0:*
udp 0 0 0.0.0.0:9804 0.0.0.0:*
udp6 0 0 :::12799 :::*
udp6 0 0 :::37953 :::*

6 显示路由表 –rn

[root@centos7 ~]# netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.29.1 0.0.0.0 UG 0 0 0 ens33
192.168.29.0 0.0.0.0 255.255.255.0 U 0 0 0 ens33
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
[root@centos7 ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.29.1 0.0.0.0 UG 100 0 0 ens33
192.168.29.0 0.0.0.0 255.255.255.0 U 100 0 0 ens33
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0

7 显示每个协议的统计信息

显示所有端口的统计信息 netstat -s

[root@centos7 ~]# netstat -s
Ip:
3808 total packets received
0 forwarded
0 incoming packets discarded
2444 incoming packets delivered
2254 requests sent out
32 outgoing packets dropped
Icmp:
676 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 148
echo replies: 528
717 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 148
echo request: 569
[……]

显示 TCP 或 UDP 端口的统计信息 netstat -st 或 -su

[root@centos7 ~]# netstat -st
IcmpMsg:
InType0: 528
InType3: 148
OutType3: 148
OutType8: 569
Tcp:
0 active connections openings
2 passive connection openings
0 failed connection attempts
0 connection resets received
2 connections established
1637 segments received
1418 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent

[root@centos7 ~]# netstat -su
IcmpMsg:
InType0: 528
InType3: 148
OutType3: 148
OutType8: 569
Udp:
0 packets received
140 packets to unknown port received.
0 packet receive errors
169 packets sent
0 receive buffer errors
0 send buffer errors
UdpLite:
IpExt:
InMcastPkts: 27
OutMcastPkts: 33
InBcastPkts: 766
InOctets: 410294
OutOctets: 432666
InMcastOctets: 4963
OutMcastOctets: 5444
InBcastOctets: 179503
InNoECTPkts: 3848

8 显示 PID 和进程名称 netstat -p

[root@centos7 ~]# netstat -p
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 52 centos7.3.local:ssh gateway:51029 ESTABLISHED 1552/sshd: root@pts
tcp 0 0 centos7.3.local:ssh gateway:51180 ESTABLISHED 1854/sshd: root@pts
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags Type State I-Node PID/Program name Path
unix 2 [ ] DGRAM 8520 1/systemd /run/systemd/notify
unix 2 [ ] DGRAM 8522 1/systemd /run/systemd/cgroups-agent
unix 5 [ ] DGRAM 8542 1/systemd /run/systemd/journal/socket
unix 28 [ ] DGRAM 8544 1/systemd /dev/log
unix 2 [ ] DGRAM 11419 1/systemd /run/systemd/shutdownd
unix 3 [ ] STREAM CONNECTED 23993 1276/ibus-x11

原创文章,作者:linux is not unix,如若转载,请注明出处:http://www.178linux.com/74901

(0)
linux is not unixlinux is not unix
上一篇 2017-05-07 14:24
下一篇 2017-05-07 15:41

相关推荐

  • 负载均衡一个PHP应用

    1、mariadb、nfs服务器的设置 (centos 7) [root@localhost ~]# rpm -q rpcbind rpcbind-0.2.0-32.el7.x86_64 [root@localhost ~]# rpm -q nfs-utils (默认n…

    Linux干货 2016-10-31
  • 第二周作业

    1、Linux上的文件管理类命令都有哪些,其常用的使用方法及其相关示例演示。  cp复制,mv移动,rm删除     1、cp:             1,用法:      &n…

    Linux干货 2016-07-04
  • Linux基础学习总结(二)

    经过前两周的学习,我们大家对于Linux系统和操作已经有了一定的认识。基于Linux平台进行开发,确实要更方便和高效,我经过自己的学习消化,现在将自己的理解的几点总结下来: Linux哲学思想的几句话,简洁的阐明了linux系统的特点。其中一切都是一个文件这句话特别精辟,在实际学习和操作linux系统之后,更是深刻体会到了这句话的内涵,感受颇深。它具体指明了…

    Linux干货 2018-03-16
  • bash变量之位置参数变量

        什么是变量     变量是 bash 环境中非常重要的一个玩意儿,就是让某一个特定字串代表不固定的内容就是了,讲的更简单一点,我们可以“用一个简单的 "字眼" 来取代另一个比较复杂或者是容易变动的数据”。    &nbsp…

    Linux干货 2016-08-15
  • 计算机的组成及功能

    计算机的组成及功能 计算机由CPU、存储器、输入设备、输出设备等部件组成。 CPU:为计算机的中央处理器,是计算机的核心部分,由运算器和控制器组成。 运算器:CPU中用于进行算术运算和逻辑运算的部件。 控制器:整个CPU的指挥中心,控制程序中指令读取、解析并产生相应的操作控制信息保证各程序的有序执行。 存储器:计算机中用来存储数据、程序等信息的部件,并在需要…

    Linux干货 2017-07-02
  • 搭建SSH服务器

    Linux 远程登录服务:sshSSH是标准的网络协议,可用于大多数UNIX操作系统,能够实现字符界面的远程登录管理,它默认使用22号端口,采用密文的形式在网络中传输数据,相对于通过明文传输的Telnet,具有更高的安全性。SSH提供了口令和密钥两种用户验证方式,这两者都是通过密文传输数据的。不同的是,口令用户验证方式传输的是用户的账户名和密码,这要求输入的…

    Linux干货 2017-07-24