RFC3261: SIP:27.4 方法和响应代码

最新推荐文章于 2026-04-27 13:52:07 发布

翻译最新推荐文章于 2026-04-27 13:52:07 发布 · 145 阅读

0 ·

本内容遵循CC 4.0 BY-SA版权协议

原文链接：https://www.ietf.org/rfc/rfc3261.html#section-27.4

GEO检测

收录于

SIP

本文档详细描述了SIP协议下的方法和响应代码子注册表，包括初始方法列表（如INVITE、ACK等）以及响应代码表的填充规则，强调了注册新代码所需的信息，如RFC编号和默认原因短语。

27.4 Method and Response Codes
27.4 方法和响应代码

   This specification establishes the Method and Response-Code sub-registries under Session Initiation Protocol (SIP) Parameters and initiates their population as follows.  The initial Methods table is:

本规范在会话发起协议（SIP）参数下建立方法和响应代码子注册表，并按如下方式启动它们的填充。初始方法表为：

         INVITE                   [RFC3261]
         ACK                      [RFC3261]
         BYE                      [RFC3261]
         CANCEL                   [RFC3261]
         REGISTER                 [RFC3261]
         OPTIONS                  [RFC3261]
         INFO                     [RFC2976]

   The response code table is initially populated from Section 21, the portions labeled Informational, Success, Redirection, Client-Error, Server-Error, and Global-Failure.  The table has the following format:

响应代码表最初是从第21节填充的，这些部分标记为“信息”、“成功”、“重定向”、“客户端错误”、“服务器错误”和“全局故障”。该表的格式如下：

      Type (e.g., Informational)
            Number    Default Reason Phrase         [RFC3261]

   The following information needs to be provided in an RFC publication in order to register a new response code or method:

为了注册新的响应代码或方法，需要在RFC发布中提供以下信息：

      o  The RFC number in which the method or response code is registered;

o注册方法或响应代码的RFC编号；

      o  the number of the response code or name of the method being registered;

o响应代码的编号或正在注册的方法的名称；

      o  the default reason phrase for that response code, if applicable;

o该响应代码的默认原因短语（如适用）；

标签

#sip