Trait Eq 

pub trait Eq: PartialEq<Self> + PointeeSized { }

Trait for comparisons corresponding to equivalence relations.

The primary difference to PartialEq is the additional requirement for reflexivity. A type that implements PartialEq guarantees that for all a, b and c:

• symmetric: a == b implies b == a
• transitive: a == b and b == c implies a == c
• consistent: a != b if and only if !(a == b)

Eq, which builds on top of PartialEq also implies:

• reflexive: a == a

This property cannot be checked by the compiler, and therefore Eq is a trait without methods.

Violating this property is a logic error. The behavior resulting from a logic error is not specified, but users of the trait must ensure that such logic errors do not result in undefined behavior. This means that unsafe code must not rely on the correctness of these methods.

Floating point types such as f32 and f64 implement only PartialEq but not Eq because NaN != NaN.

Derivable

This trait can be used with #[derive]. When derived, because Eq has no extra methods, it is only informing the compiler that this is an equivalence relation rather than a partial equivalence relation. Note that the derive strategy requires all fields are Eq, which isn’t always desired.

How can I implement Eq?

If you cannot use the derive strategy, specify that your type implements Eq, which has no extra methods:

enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

struct Book {
    isbn: i32,
    format: BookFormat,
}

impl PartialEq for Book {
    fn eq(&self, other: &Self) -> bool {
        self.isbn == other.isbn
    }
}

impl Eq for Book {}

Dyn Compatibility

This trait is not dyn compatible.

In older versions of Rust, dyn compatibility was called "object safety".

Implementors

impl Eq for !

impl Eq for ()

impl Eq for AddrParseError

impl Eq for core::mem::Alignment

impl Eq for core::fmt::Alignment

impl Eq for AllocError

impl Eq for AsciiChar

impl Eq for Assume

impl Eq for AtomicOrdering

impl Eq for ByteStr

impl Eq for CStr

impl Eq for CharCase

impl Eq for CharTryFromError

impl Eq for CpuidResult

Available on x86 or x86-64 only.

impl Eq for DebugAsHex

impl Eq for DecodeUtf16Error

impl Eq for Duration

impl Eq for Error

impl Eq for ErrorKind

impl Eq for FieldId

impl Eq for FormattingOptions

impl Eq for FpCategory

impl Eq for FromBytesUntilNulError

impl Eq for FromBytesWithNulError

impl Eq for GetDisjointMutError

impl Eq for Infallible

impl Eq for IntErrorKind

impl Eq for IpAddr

impl Eq for Ipv4Addr

impl Eq for Ipv6Addr

impl Eq for Ipv6MulticastScope

impl Eq for Layout

impl Eq for LayoutError

impl Eq for Locality

impl Eq for Location<'_>

impl Eq for core::cmp::Ordering

impl Eq for core::sync::atomic::Ordering

impl Eq for ParseBoolError

impl Eq for ParseCharError

impl Eq for ParseFloatError

impl Eq for ParseIntError

impl Eq for PhantomPinned

impl Eq for RangeFull

impl Eq for SearchStep

impl Eq for SeekFrom

impl Eq for Sign

impl Eq for SimdAlign

impl Eq for SocketAddr

impl Eq for SocketAddrV4

impl Eq for SocketAddrV6

impl Eq for TryFromCharError

impl Eq for TryFromFloatSecsError

impl Eq for TryFromIntError

impl Eq for TypeId

impl Eq for Utf8Error

impl Eq for VariantId

impl Eq for bool

impl Eq for char

impl Eq for i8

impl Eq for i16

impl Eq for i32

impl Eq for i64

impl Eq for i128

impl Eq for isize

impl Eq for str

impl Eq for svpattern

Available on AArch64 or ARM64EC only.

impl Eq for svprfop

Available on AArch64 or ARM64EC only.

impl Eq for u8

impl Eq for u16

impl Eq for u32

impl Eq for u64

impl Eq for u128

impl Eq for usize

impl<'a> Eq for PhantomContravariantLifetime<'a>

impl<'a> Eq for PhantomCovariantLifetime<'a>

impl<'a> Eq for PhantomInvariantLifetime<'a>

impl<'a> Eq for Utf8Chunk<'a>

impl<'a> Eq for Utf8Pattern<'a>

impl<A> Eq for &A

where A: Eq + PointeeSized,

impl<A> Eq for &mut A

where A: Eq + PointeeSized,

impl<B: Eq, C: Eq> Eq for ControlFlow<B, C>

impl<Dyn: PointeeSized> Eq for DynMetadata<Dyn>

impl<F: FnPtr> Eq for F

impl<H> Eq for BuildHasherDefault<H>

impl<Idx: Eq> Eq for core::ops::Range<Idx>

impl<Idx: Eq> Eq for core::range::Range<Idx>

impl<Idx: Eq> Eq for core::ops::RangeFrom<Idx>

impl<Idx: Eq> Eq for core::range::RangeFrom<Idx>

impl<Idx: Eq> Eq for core::ops::RangeInclusive<Idx>

impl<Idx: Eq> Eq for core::range::RangeInclusive<Idx>

impl<Idx: Eq> Eq for RangeTo<Idx>

impl<Idx: Eq> Eq for core::ops::RangeToInclusive<Idx>

impl<Idx: Eq> Eq for core::range::RangeToInclusive<Idx>

impl<Ptr: Deref<Target: Eq>> Eq for Pin<Ptr>

impl<T, const N: usize> Eq for Simd<T, N>

where T: SimdElement + Eq,

impl<T: ?Sized + Eq> Eq for ManuallyDrop<T>

impl<T: ?Sized + Eq> Eq for RefCell<T>

impl<T: ?Sized, const VARIANT: u32, const FIELD: u32> Eq for FieldRepresentingType<T, VARIANT, FIELD>

impl<T: Eq + Copy> Eq for Cell<T>

impl<T: Eq + PointeeSized> Eq for TraitImpl<T>

impl<T: Eq, E: Eq> Eq for Result<T, E>

impl<T: Eq, const N: usize> Eq for [T; N]

impl<T: Eq> Eq for (T₁, T₂, …, Tₙ)

This trait is implemented for tuples up to twelve items long.

impl<T: Eq> Eq for Bound<T>

impl<T: Eq> Eq for Cursor<T>

impl<T: Eq> Eq for OnceCell<T>

impl<T: Eq> Eq for Option<T>

impl<T: Eq> Eq for Poll<T>

impl<T: Eq> Eq for Reverse<T>

impl<T: Eq> Eq for Saturating<T>

impl<T: Eq> Eq for Wrapping<T>

impl<T: Eq> Eq for [T]

impl<T: PointeeSized> Eq for *const T

Pointer equality is an equivalence relation.

impl<T: PointeeSized> Eq for *mut T

Pointer equality is an equivalence relation.

impl<T: PointeeSized> Eq for NonNull<T>

impl<T: PointeeSized> Eq for PhantomData<T>

impl<T> Eq for Discriminant<T>

impl<T> Eq for NonZero<T>

where T: ZeroablePrimitive + Eq,

impl<T> Eq for PhantomContravariant<T>

where T: ?Sized,

impl<T> Eq for PhantomCovariant<T>

where T: ?Sized,

impl<T> Eq for PhantomInvariant<T>

where T: ?Sized,

impl<T> Eq for SyncView<T>

where T: Sync + Eq + ?Sized,

impl<Y: Eq, R: Eq> Eq for CoroutineState<Y, R>